Wide Screen (16:9); Digital Image Stabilization (Dis) - Sharp ViewCam VL-NZ50E Operation Manual

Wide Screen (16:9)

The wide screen function lets you record
scenes with the wide-screen feel of a movie
shown in a theatre. The top and bottom of the
picture are masked with black bands to
produce an effective screen aspect ratio of
16:9.
Normal screen
1
In CAMERA mode, press the MENU
button until the menu screen appears.
2
Press l or m on the operation button
to select Y, then press the SET button.
3
Press l or m to select "16:9", then
press the SET button.
S E T T I NG 2
D G T L Z OOM
T A P E
D I S
1 6 9
A UD I O MOD E
R E T U RN
4
Press l or m to select "ON", then press
the SET button.
• The picture is displayed with the top and
bottom portions masked.
1 6 9 :
5
Press the MENU button to turn off the
menu screen.
To return to normal screen
Select "OFF" in step 4 above.
VL-NZ50E-E-027-033
Wide screen
S P E E D
O F F
:
ON
ON
30
Digital Image
Stabilization (DIS)
The digital image stabilization (DIS) function
allows you to stabilize the image by electroni-
cally compensating for relatively minor image
shaking that is often annoying in close-up
shots.
1
In CAMERA mode, press the MENU
button until the menu screen appears.
2
Press l or m on the operation button
to select Y, then press the SET button.
3
Press l or m to select "DIS", then
press the SET button.
S E T T I NG 2
D G T L Z OOM
T A P E S P E E D
D I S
1 6 9 :
A UD I O MOD E
R E T U RN
4
Press l or m to select "ON", then press
the SET button.
D I S ON
5
Press the MENU button to turn off the
menu screen.
• The DIS indicator only appears when the
on-screen indicators are turned on.
To cancel DIS function
Select "OFF" in step 4 above. The z indicator
will disappear.
Notes:
• The DIS function cannot compensate for
excessive image shaking.
• When image shaking does not occur (e.g. when
using the camcorder on a tripod), turn off the DIS
function. The picture will appear more natural
when the DIS function is off.
02.4.8, 10:50 AM
ON
O F F
DIS indicator
30