Special Notes; Maintenance - Sharp QT-CD121H Operation Manual

<P=001>
YT

SPECIAL NOTES

If the model name contains a parentheses, the
letters in the parentheses indicate the colour of
the product. Operation and specifications are
unaffected.
Recording and playback of any material may
require consent, which SHARP is unable to give.
Please refer particularly to the provisions of the
Copyright Act 1956, the Dramatic and Musical
Performers Protection Act 1958, the Performers
Protection Acts 1963 and 1972 and to any sub-
sequent statutory enactments and orders.
This equipment complies with the requirements
of Directives 89/336/EEC and 73/23/EEC as
amended by 93/68/EEC.
When the FUNCTION switch is set at STAND-BY
position, mains voltage is still present inside the
unit.
Warning:
This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove the
mains plug from the socket before any service oper-
ation and when not in use for a long period.
ACCESSORY
AC power lead 1

MAINTENANCE

Internal care
Do not touch the Laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
After long use, the deck's heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours of
playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser's
instructions carefully before use.
Warning:
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing liquids.
Caution:
Use of controls, adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
As the laser beam used in this compact disc
player is harmful to the eyes, do not attempt to
disassemble the cabinet. Refer servicing to
qualified personnel only.
Parts and accessories mentioned in
this operation manual other than those
in the drawing are not included.
Notes:
Remote control 1
External care
Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry cloth.
Do not use chemically treated cleaning cloths or
other chemicals.
1
QT-CD121H(SUK) TINSE0004SJZZ
The AC power lead and remote
control are located in the poly-
styrene.