Using The Digital Image Stabilization (Dis) Feature - Sharp VL-H400X Operation Manual

By using the electronic shutter together with the "snapshot
l
recording function, you can record a completely still Image
without any blurring.
The quality of pictures recorded In Snapshot Recordtng
l
mode WIII be slightly lower than normal pictures.
USING THE DIGITAL IMAGE
The DIS button lets you stabilize the image by electro-
nically cancelling relatively small VIEWCAM shakes
that are often annoying In closeup shots.
Press the DIS The " & " (DIS) Indicator appears
button.
at the right of the monitor screen.
To return to normal recording mode, press the 31s
button once again. The DIS Indicator WIII disappear.
When the DIS mode IS
engaged, the screen Image IS sllght$
l
magnified, and the shutter speed
IS
speed (l/50 set
from the standard
Image resolutton slightly decreases In DIS mode
l
Under the light of fluorescent lamps, the picture may
l
l
Ineffective
Leave the DIS function Inactive when you use the VlEWCAhil
l
on a trtpod
When you wish to save battery consumption. Keep the ZIS
l
function inactive.
The DIS function capnot compensate for excessive VIEWCAhl
shake, or 'or the subjects or sltuatlons descrlbed below
( * T h e
Subject with verttcal or hcrizontai stripes
l
Subject with low contrast i*)
l
Subject with a plain background
l
Dark or dimly Ilt subject
l
There are many moving subjects In a slrgie 'rame
l
A shutter speed other than
l
RECORDING A FIVE-SECOND
STILL IMAGE
The SNAP button lets you recprd a stlli picture ("snap-
shot") for about five seconds, together wtth normal
sound.
Recording a Snapshot While in Ret Pause Mode
If you press the SNAP button whtie the VIEWCAM
Recording Standby mode, a still Image of the subject
When "snapshot" recording finished, the VIEWCAM
IS
IS
monitor screen also displays the freeze-frame Image.
Recording a Snapshot While in Recording Mode
If you press the SNAP button while recording, when
the snapshot has been recorded, the VIEWCAM
to l/l 20 sec..
IS
IS