Recording From An External Source - Sharp ViewCam VL-E79E Operation Manual

Useful Features
Playback and Editing
Recording from an External To Record from an External Source
Source
1
You can use this VIEWCAM to record or edit video
from another source. such as a VCR TV. or video
disc player.
Connecr the VIEWCAM to the sourc? equrpment,
2
using the supplied audloivideo caoie as shown.
Recording
3
To AUDIO/VIDEO
Audioivldeo cable ./
(supplied)
1
t
White: [%i
YEilOW
To AUDIO
2 f Tc VIDEO
Playback
~~__U_U_U--^-..I.,-,.",~'-"--,.,.------~_,_____"__"_.
r
_,_,,.,. ," ,_^
; TV with monitor output
VCR
.
"-1
( '-A
2
;: .=
-__________
Video disc player
Automatic switching of the AUDIO/
VIDEO jack's input/output mode
The AUDIO/VIDEO jack's mode is normally set to
input. It automatically switches to output when the
VIEWCAM IS playing back.
i
Set the Power switch to
VCR.
Start sending audio/video signals from
the source equipment connected to the
VIEWCAM. Check the VIEWCAM's
monitor to see if the picture is being
properly received.
Press the REC START/STOP button on
the VIEWCAM to start recording.
I
I
1 zurce equipme: 1
% 8
REC START/STOP button
I
Pow& switch
PAUSE button
Notes:
l
To pause recording, press the PAUSE button
(w) on the VIEWCAM. Press the button again to
resume recording.
l
The REC START/STOP button on the remote
control has no effect when the VIEWCAM's
Power switch is set to VCR.
To Stop Recording
Press the STOP button ( n ) on the VIEWCAM.