Power Source - Sharp FV-DB2E Operation Manual

Power source

FV-DB2E
" Inserting memory batteries
Memory batteries maintain the clock setting and preset stations for
the tuner.
Failure to install the batteries correctly will cause loss of memory
and the unit will revert to Auto Tune mode when next switched on.
1
Press and slide the cover
to open the battery com-
partment.
2
Insert the supplied
"AA" size batteries (UM/
SUM-3, R6, HP-7 or simi-
lar) into the battery com-
partment.
Insertion and removal:
Push the battery toward
3
Close the battery compartment.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Notes:
! If memory batteries are not inserted or low, preset stations and
the clock setting will be lost.
! Enter the power stand-by mode and connect the AC adaptor
before replacing memory batteries. Otherwise preset stations
and the clock setting will be lost.
! Replace memory batteries approximately once a year.
Precautions for battery use:
! Installing the batteries incorrectly may cause the unit to malfunction.
! Insert the batteries according to the direction indicated in the
battery compartment.
! Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leakage.
! Replace all old batteries with new ones at the same time.
! Do not mix old and new batteries.
6
2
2 1
to insert or remove.
" Using with the main batteries
When the unit is powered by the main batteries, make sure to install
memory batteries. Otherwise preset stations, the clock setting and
DAB setting will be all lost when the main batteries run out.
1
Disconnect the AC adaptor, and open the battery compartment.
2
Insert 6 "C" size alkaline
batteries (LR14) into the
battery compartment.
"C" size alkaline batteries (LR14) are not included.
Insertion and removal:
Push the batteries and toward
3
Close the battery compartment.
Battery replacement:
When batteries are low, sound decreases or becomes distorted.
Replace the batteries with new ones.
" Using with the AC adaptor
To the DC 9V socket
Plug the AC adaptor into the wall socket, and then insert the plug on
the other end into the DC 9V socket.
Notes:
! Unplug the AC adaptor from the wall socket if the unit will not be
used for a prolonged period of time.
! Connecting the AC adaptor to the unit disconnects the main batteries.
! Use only the supplied AC adaptor. Using other AC adaptor may
cause an electric shock or fire.
05/4/21 FVDB2E_UK.fm
6
4 5
2 3 1
to insert or remove.
Wall socket
(AC 230 - 240 V, 50 Hz)
TINSEA048SJZZ