Auto Tune - Sharp FV-DB2E Operation Manual

" Auto tune

When turned on for the first time, the unit scans radio stations
automatically to create a station list.
! 12-digit solid blocks show the progress of scan.
! The number of received stations is displayed.
Total received stations
After the scan:
The stations will be stored in alphanumeric order and the first station
on the list will be selected and you will hear it through the speakers.
! To listen to other stations, see "Selecting a station in the station
list" on page 10.
! You can arrange the order of stations in the station list (see page
11).
Notes:
! If no station is found, "No station" appears.
! Up to 99 appears for total received stations.
" Retuning the unit (Auto tune)
You can retune the radio when you move the unit to other areas or
add multiplex channels to the station list.
There are two Auto tune options available.
Autotune UK: Only the frequencies of radio stations in the UK are
scanned. This may take a few seconds.
Autotune Full: The full range of digital frequencies is scanned in
Band III. This may take a few minutes.
1
Press the BAND button until "DAB" ap-
pears on the display.
2
Autotune UK:
Press the AUTO TUNE button for less
than 1 second.
Autotune Full:
Hold down the AUTO TUNE button for 2
seconds or more.
You can cancel the Auto tune by pressing the AUTO TUNE but-
ton again.
After the scan:
The unit will return to the station you were listening to and you will
hear it through the speakers. All the stations found are now stored in
the unit.
05/4/21 FVDB2E_UK.fm
FV-DB2E
3
9
TINSEA048SJZZ