Preparation - SGC High Power ADSP Installation Manual

2. Preparation

2
The ADSP installation provides you with an unprecedented ADSP capability, far beyond
what you can find on most amateur radio transceivers.
Every possible effort has been made to provide you with a simple, easy to use product.
One where you can concentrate on your communication and not on fiddling with knobs.
2
SGC's ADSP will give you years of service improving your ability to communicate.
Prepare your work area
¨
Assemble your tools and parts
¨
2
ADSP board
2
ADSP switch assembly
Double-stick tape for mounting the board
Tools for disassembling your transceiver
soldering iron suitable for working with Surface Mount Devices
3. Install the ADSP
Open your transceiver
¨
Remove the backing from the double-stick foam tape and
¨
attach the ADSP
Connect the ADSP
¨
The following connections will be made between connector J2 on the ADSP
the transceiver:
Pin 2 to 12V DC
Pin 6 to DC ground
SGC Inc. SGC Building, 13737 SE 26th St. Box 3526 Bellevue, WA. 98009 USA
E-mail: sgc@sgcworld.com • World Wide Web:
High Power ADSP
Generic – Any Transceiver
Catalog Number 70-12
2
Board
2
assembly into a convenient location
2
into the signal path
Fax: 425-746-6384, Tel: 425-746-6310 or 1-800-259-7331
©April 2003 SGC Inc
2
Installation
www.sgcworld.com
2
board and