Playing Back Moving Pictures (Mpeg4); To Change The Display Size - Panasonic SV-AV50S Operating Instructions Manual

Playing Back Moving
Pictures (MPEG4)
Plays back moving pictures recorded on the Memory
Card.
1
Set the Record/Play mode Switch to [
and set the operation mode to [MPEG4].
≥Moving picture files recorded on the Memory
Card are displayed in the index picture screen.
2
Roll the Jog Ball to select a desired file.
3
Press the Jog Ball.
≥A moving picture file is played back.
≥After playing back continuously from the selected
file to the last file, the display reverts to the index
picture screen.
≥Indication A displays for about 3 seconds from a
playback start.
ª Operation during Playback
Stop (Reverts to the
index picture screen.)
Pause
Finding the beginning
of next (this) file
≥The image can be fast-forwarded or fast-rewound by
pressing [9/:] on the remote controller during
playback. (No audio is output during fast-forwarding/
fast-backwarding.) (l 30)
≥The playback speed becomes normal when you
reach the next file.
ª To Change the Display Size
Press the [MENU] Button and set [LCD screen] to
[Full] or [Normal]. 1
≥Despite the setting, the display size on an external
device is limited to [Normal].
ª For Repeat Playback
Press the [MENU] Button and set [Repeat] to
[1File] or [All]. 2
Press the Jog Ball.
Roll the Jog Ball DOWN.
(Roll the Jog Ball UP to
resume playback.)
Roll the Jog Ball
RIGHT (LEFT) by 1 time.
1
2
]
MPEG4
3
A
1
2
MODE MODE
25