Table of Contents
Advertisement
Advanced Colour Adjustments
If you would like to create your own images with settings adjusted the way you want them, you can
adjust "Skin Tone", "Abs. Color Temp.", "RGB/RGBCMY" and/or "Gamma" in the "Color
Adjustment" sub-menu of the "Picture" menu. (When "sRGB " is not selected in Color Mode.)
The adjustment values can be stored in the memory so that you can retrieve them and apply them to the
projected images at any time. (
"Skin Tone", "Abs.Color Temp." and "Gamma" are adjusted using the respective remote control
buttons.
Skin tone adjustment
If you would like to further enhance skin tones, use this "Skin Tone" setting to make the adjustment.
If set to the + side, the colours become greenish, and if set to the – side, the colours become reddish.
Absolute colour temperature adjustment
20
page 24)
s
Press
on the projector's control panel to select
an item.
Press
* If you press
This can be used to adjust the skin tones for images of people.
The Epson Cinema Filter effect that is automatically applied to
images when a "Color Mode" setting is made creates natural-
looking skin tones.
You can adjust the overall tint of images.
If you select a higher value, images appear bluish, and if
you select a lower value, images appear reddish.
The absolute colour temperature can be set to one of
12 settings within the range of 5000K to 10000K.
Gamma adjustment
Skin tone adjustment
Absolute colour
temperature adjustment
on the remote control or
or
to make the adjustment.
, the menu disappears.
Advertisement
Table of Contents
