JVC EXAD KD-AVX2 Instructions Manual page 41

Indications
AV Input
External Input
Beep
Telephone Muting
Surround Off
Surround On
* Reverse gear signal connection is needed to change the monitor view automatically. See
1
Installation/Connection Manual (separate volume).
* 2 The source indication changes automatically depending on the type of external component
connected.
* 3 Selectable only when DISC is the source.
* 4 For the menu items of "Dolby PLII Movie" and "Dolby PLII Music", see page 26.
Selectable settings, [reference page]
You can determine the use of LINE IN and VIDEO IN jacks.
Off :
Select when you do not need AV-Input as a source (AV-IN
is deleted from the source items).
Audio&Video: [Initial]
Select this when connecting an AV component such as a VCR.
Audio:
Select this when connecting an audio component such as a
cassette deck.
Camera *
1
:
Select this when connecting the rear view camera. The rear
view through the camera is automatically displayed on the
monitor when you change the gear to the back position.
Camera Reverse * 1
:
The mirror image of the rear view through the rear view
camera is automatically displayed on the monitor when you
change the gear to the back position. (The monitor on the unit
only; the normal rear view appears on the external monitor.).
Changer/iPod/D. Player *
To use a JVC CD changer, iPod, JVC D. player, etc. [46, 54]
External Input:
To use any external component other than above. [53]
You can deactivate the key-touch tone if you do not want it
to beep each time you press a button.
Off : Cancels.
On: [Initial]; Activates the key-touch tone.
Off : [Initial]; Cancels.
Muting1/Muting2: Select either one which mutes the
Select to deactivate the surround function.
Select to activate the surround function. [26]
Auto [Initial], Dolby PLII Movie*
2
: [Initial]
sounds while using the cellular phone.
4
, Dolby PLII Music*
4
41