Listening To The Usb Device - JVC KW-XR611 Instruction Manual

Listening to the USB device

This unit can play MP3/WMA files stored on a USB mass storage class device.
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player,
etc. to the unit.
• You can also connect an Apple iPod/iPhone to the USB input terminal. For details of the
operations, 18.
~
] Turn on the power.
If you have turned off the power (without
detaching the USB device)...
Pressing SOURCE turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
Stopping playback and detaching
the USB device
Straightly pull it out from the unit.
"NO USB" appears. Press
another playback source.
You can operate the USB device in the same
way you operate the files on a disc. (
11)
12 ENGLISH
EN12-21_KW-XR611_003A_1.indd 12 EN12-21_KW-XR611_003A_1.indd 12
Ÿ
All tracks will be played repeatedly until you change the
source or detach the USB device.
Cautions:
• Avoid using the USB device if it might hinder
• Do not pull out and attach the USB device
• Do not start the car engine if a USB device is
• This unit may not be able to play the files
• Operation and power supply may not work as
SOURCE to listen to
• You cannot connect a computer to the USB
• Make sure all important data has been backed
10,
• Do not leave a USB device in the car, expose
• Some USB devices may not work immediately
• For more details about USB operations,
USB input terminal
your safety driving.
repeatedly while "READING" is shown on the
display.
connected.
depending on the type of USB device.
intended for some USB devices.
input terminal of the unit.
up to avoid losing the data.
to direct sunlight, or high temperature to
avoid deformation or cause damages to the
device.
after attaching USB device or turn on the
power.
32.
USB memory
1/15/10 9:40:28 AM 1/15/10 9:40:28 AM