Crosley W10338608B Use And Care Manual page 3

CONTROL P EL FEATURES
k.
.......... ?............... ?........ Y
WATER LEVEL WASH TEMPERATURE OPTIONS
ALL COLD F_NS 5
HEAVY DUTY
SUPER CAPAGTY
HEAVY
EXTRA HEAVY _ '
DEL,CATE
DRAIN & SP#4_
9
NORMAL
REGULAR
CASUAL
|
4il_iiiiiiii, REGULAR
"iii;i:;;ij_iiiiii_,
LIG.,
iN START
CYCLE STATUS O
J
_ill Wash RJ_e SpL_
Not all features and options are available on all models.
Appearance may vary.
WATER LEVEL
Select the setting most suitable for your load. Small will
add a low amount of water for smaller loads and Super
will add the most amount of water for large or bulky loads.
Items need to move freely. Tightly packing can lead to poor
cleaning performance, and may increase wrinkling and
tangling.
WASH TEMPERATURE
Wash Temperature senses and maintains uniform
water temperatures by regulating incoming hot and
cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
• Warm and hot water will be cooler than what your
previous washer provided.
• Even in a cold and cool water wash, some warm water
may be added to the washer to maintain a minimum
temperature.
OPTIONS
The following options may be added to most cycles.
ONE RINSE
This option is used to limit a cycle to one rinse.
2ND RINSE
This option can be used to automatically add a second
rinse to most cycles.
FABRIC SOFTENER ADDED - ONE RINSE
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
FABRIC SOFTENER ADDED - 2ND RINSE
This option turns on both the Fabric Softener and
the 2rid Rinse options.
O
O
O
WASH CYCLE KNOB
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
START/PAUSE BUTTON
Press to start the selected cycle; press again to pause the
cycle and unlock the lid.
NOTE: If the washer is spinning, it may take several
minutes to unlock the lid. Press and hold for 3 seconds
to cancel a cycle.
CYCLE STATUS LIGHTS
CYCLE STATUS
Fill Wash Rinse Spin Done
The Cycle Status Lights show the progress of a cycle.
At each stage of the process, you may notice sounds or
pauses that are different from traditional washers.
FILL
CYCLE STATUS
Fill Wash Rinse Spin Done
When the START/PAUSE button is pressed, the washer
will first perform a self-test on the lid lock mechanism.
You will hear a click, and the lid will unlock briefly before
locking again. The washer will use spins to check for load
balance. These spins may take several minutes before
water is added to the washer. You may hear the hum
of the spins before filling. This is normal.
WASH
CYCLE STATUS
Fill Wash Rinse Spin Done
You will hear the agitator moving the load. The motor
sounds may change at different stages in the cycle.
The wash time is determined by the selected soil level.