Brother MFC-J4410DW Manual page 69

Scanning
f
Do one of the following:
To change other scan settings, see Scan Settings on page 75. After changing the settings, go to

step g.
If you do not want to change any settings, tap outside of the Scan Settings screen to close the screen,

and then go to step g.
g
Tap Scan.
The machine will start to scan the document. The scanned image will then be displayed on the screen.
Confirm the scanned image.
NOTE
• Flick left or right to view the previous or next page.
• Tap to rotate the scanned image 90° counterclockwise.
h
Do one of the following:
 To crop the scanned image, tap
 If you do not want to crop the scanned image, go to step k.
i
The area inside the box will be cropped.
 To change the size of the box, drag the arrows on the edge of the box.
To move the position of the box, tap inside the box and drag the box.

To start over and select the size of the box again, tap outside the box to clear the box, and then tap

and drag to select the area of the image you want to crop.
When finished, tap Done.
j
Confirm the cropped image. To start over and select the size of the box again, tap
to step i.
and then go to step i.
6
and then go back
65