Epson EMP 810 Network Installation Manual page 11

9. Select the security mode that your wireless network is using.
Note:
If your wireless network doesn't have security enabled, select None, then
press OK.
10. Do one of the following:
■
If your wireless network uses WPA as the security mode, continue with
"Select WPA Security Settings" on page 12.
■
If your wireless network uses WEP as the security mode, continue with
"Select WEP Security Settings" on page 13.
■
If your wireless network doesn't have security enabled, continue with
"Confirm Your Network Settings" on page 14.
Wireless Network Installation
11