How To Scan To A Memory Card Or Usb Flash Memory Drive - Brother MFC-J4310DW Basic User's Manual

PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
How to scan to a
memory card or USB
Flash memory drive
You can scan black & white and color
documents into a memory card or USB Flash
memory drive. Black & white documents will
be stored in PDF (*.PDF) or TIFF (*.TIF) file
formats. Color documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats.
The factory setting is Color and 200 dpi
and the default file format is PDF. The
machine creates file names based on the
current date. (See Quick Setup Guide.) For
example, the fifth image scanned on July 1,
2012 would be named 07011205.PDF. You
can change the color and resolution.
a
Load your document.
b
Open the media slot cover.
c
Put the memory card or USB Flash
memory drive in the correct slot.
d
Press .
e
Press (Scan).
f
Press s or t on the Touchpanel to
display Scan to Media.
g
Press Scan to Media.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while the
machine is reading or writing to it to avoid
damaging the card, USB Flash memory
drive, or the data stored on them.
h
Press Options.
Do one or more of the following:
 To change the scan type, press
s or t to display Scan Type.
9
Press Scan Type and choose
Color or Black and White.
 To change the resolution, press
s or t to display Resolution.
Press Resolution and choose
100 dpi, 200 dpi, 300 dpi,
600 dpi or Auto.
To change the file type, press s or t

to display File Type.
Press File Type and choose PDF,
JPEG or TIFF.
If you want to change the file name,

press s or t to display File Name.
Press File Name and enter the file
name.
You can only change the first
6 characters.
Press OK.
 To remove background color, press
s or t to display
Remove Background.
Press Remove Background and
choose Low, Medium, High or Off.
NOTE
Remove Background removes the base
color of documents to make the scanned
data more recognizable.
i
When you are finished choosing
settings, press OK.
NOTE
• If you chose color in the Scan Type
setting, you cannot choose TIFF.
• If you chose black & white in the Scan
Type setting, you cannot choose JPEG.
j
Press Start.
9
65