Advertisement
PROGRAMMING
End of cooking numerical programmer (Fig. 7)
Some models are fitted with a device which switches
off the oven at the end of the cooking time
programmed.
The programmer has an electric clock which shows the
time and a timer with an acoustic signal.
Fig. 7 shows the programmer commands. All
regulations are carried out by means of switches A and
B.
Switch A
Turn in a clockwise direction to correct the time shown
on the numerical display (on installaton, after electricity
cut, if it is in advance or behind, etc.).
Switch B
Turn the switch in a clockwise direction to select:
Cooking time (max. 210 minutes);
Interruption of the acoustic signal (position
Manual use of the oven (position
Corresponding symbols appear on screen C.
A B
FO 0158
62
);
C
Manual operation
The oven can be used normally, without any
programming. For this, turn switch B in a clockwise
direction until the symbol
Programming
Prepare the dish to be cooked; turn switch B in a
clockwise direction to regulate the cooking time (in
minutes) (window C).
Turn the oven switch to regulate the cooking time.
An acoustic signal indicates the end of cooking time;
to cancel the acoustic signal, turn switch B to display
symbol
);
Fig. 7
appears in the window.
in window C.
Advertisement
