Advertisement
It will let you view a LIST similar to the one that
the GENERATOR / VOICE routine did. If you select
your VOICE with the MIDI MIXER, when you have
completed selection you can click on the INSERT
PARAMETER icon on the toolbar and the SQ01 will
automatically create the setup data and insert it
into the appropriate tracks.
Saving data
Saving data in the SQ01 should be done in one of
the native formats. The .yws format will save your
entire session but not the audio and there is a
second .yws format (with Samples), which will
save your session and audio included in it.
•
Click SAVE AS... and select the appropriate
type file for your purpose
If you are doing a non-audio session, and wish to
send the file to a SmartMedia card for play in real
time from the S90's playback sequencer:
•
Save your data as a SMF TYPE 0
•
Send your MIDI MIXER settings to the S90 by
clicking on the TRANSMIT PARAMETERS icon
(a MIDI jack icon). Then you can save the MIX
to an S90 TEMPLATE
•
From the MIX area press F5 TEMPLATE
•
Name one of the 50 MIX TEMPLATES and
press SF5 PUT to place (or Put) the current
MIX to the location.
•
When you transfer your SMF to SmartMedia
card and place it in the S90, you can create a
play list (called a CHAIN) – each Chain can
recall a MIX and then a SMF – you can even
program in stops;
Manually retrieving a Template is called "GET" and
is accessed from F5 Template/ SF4 Get.
You can use the Chain function to automate recall
of mix setups from the FLASH ROM of the S90 and
then play SMF from the SmartMedia card. This
requires that you create several TEMPLATES (one
for each Song setup) – These will be stored in the
S90's Flash ROM memory. Name your MIX
Templates appropriately, then set up a Chain (F1)
that has steps that look something like this:
01 mix01: Feelings (recalls the Template)
02 SMF: Feelings (plays the song)
03 mix02: My Girl (recalls the Template)
04 SMF: My Girl (plays the song)
05 mix03: SanJose? (recalls the Template)
06 SMF: SanJose? (plays the song)
07 Stop (program a stop for an announcement)
08 mix04: Alfie (recalls the Template)
09 SMF: Alfie (plays the song)
etc., etc. There are 50 TEMPLATES and 100 STEPS
available in a CHAIN. When you push PLAY, the
Mix will be recalled from the internal FLASH ROM
Mix Template and then the Chain will play the
NEXT SMF (song) directly from SmartMedia card.
In other words, to recall mix01 for "Feelings", you
start at the top of the list. It will instantly recall
the MIX and go on to play the song "Feelings".
The Chain will advance automatically and wait
after playing "SanJose?" Step 07 is a programmed
stop. When you push PLAY again it will continue
from the current position and recall the mix04
"Alfie" from the internal Template setup, and then
immediately
play
SmartMedia card.
©Yamaha Corporation of America
6
the
song
file
from
Phil Clendeninn
Senior Product Specialist
Technology Products
the
Advertisement
