Remote Control - Yamaha HTR-5630RDS Owner's Manual

CONTROLS AND FUNCTIONS

Remote control

This section describes the remote control controls and
their functions.
1
DVD D-TV/CBL VCR
2
CD MD/CD-R V-AUX 6CH IN
TUNER A/B/C/D/E
3
/DTS 6.1/5.1 NIGHT
4
5
TEST
6
7
PROG
LEVEL
8
9
0
6
POWER
PRESET
SLEEP
STEREO
VOLUME
PROG
MUTE
SET MENU
VOLUME
1 Infrared emitter
Outputs infrared control signals. Aim this emitter at the
unit when using the remote control.
2 Input selector buttons
Select the input source.
3 A/B/C/D/E
Selects preset station groups A to E when the unit is in
tuner mode.
q
4 q/DTS
Selects the built-in Dolby Digital, DTS, Dolby Pro Logic
w
or Pro Logic II decoder.
5 6.1/5.1
e
Switches on or off the Dolby Digital + Matrix 6.1 or DTS
+ Matrix 6.1 decoder.
r
t 6 TEST
Outputs a test tone for use when adjusting the speaker
y
levels.
u
7 MUTE
Mutes the sound. Press again to restore the audio output
to the previous volume level.
i
8 LEVEL
Selects the effect speaker channel to adjust.
9 PROGRAM –/+
Select the DSP program.
0 Multi control section
Used to change and implement settings.
q POWER
Turns the unit on, or sets it in standby mode.
w 6CH IN
Selects the audio source connected to the 6CH INPUT
jacks.
e PRESET –/+
Select preset station numbers 1 to 8.
r SLEEP
Sets the sleep timer.