Craftsman 316.792420 Operator's Manual page 6

I_ I WARNING:
To prevent serious personal injury or
!
damage to the unit, make sure the nozzle is properly
installed before operating the unit.
Groove
Bu_on
JBk
WARNING: To prevent serious personal injury, take the
following steps before installing or removing nozzles:
• Stop the unit and allow the impeller to come to a
complete stop
Disconnect the spark plug wire or disconnect the unit from
the power source before installing or removing nozzles.
Housing
Nozzle
_ WARNING:
To prevent serious personal injury, do not |
|
insert hands into the nozzles or housing when removing or
1
installing nozzles.
iNSTALLiNG A NOZZLE
1. Align the button on the inside of the nozzle with the groove on
the housing (Fig. 1).
2. Push the nozzle onto the housing and turn the nozzle clockwise
until it locks into place (Fig. 2).
NOTE: The button should face up when the nozzle is properly
installed.
Fig. 1
Unlock
Lock
/
Fig. 2
REMOVING A NOZZLE
1. Turn the nozzle counterclockwise approximately 45 ° until the
button unlocks from the housing (Fig. 2).
2. Pull the nozzle off of the housing (Fig. 2).