Craftsman 917.25024 Operator's Manual page 9

_JlkCAUTION: Lift lever is spring loaded.
Have a tight grip on lift lever, lower it slowly
and engage in lowest position. Lift lever is
located on ]eft side of fender.
Lift
Lever
2. ASSEMBLE FRONT GAUGE WHEEL
(W) TO FRONT OF MOWER
[
H. Front Mower Bracket
W. Front Gauge Wheel
X. Shoulder Bolt
Y. 1-1/40.D, Washer
Z. 3/8-16 Locknut
3. TURN STEERING WHEEL LEFT AND
POSITION MOWER
• Turn steering wheel to the leTtas far as it
will go and position mower on right side of
tractor with deflectorshield (Q)tothe right.
Front
_"_ Transaxle
Q. Deflector Shield
4. SLIDE MOWER UNDER TRACTOR
• Bring belt forward and check belt for
properrouting inallmowerpulleygrooves.
NOTE: Be sure mower side suspension
arms (A) are pointing forward before sliding
mower under tractor.
• Slide mower under tractor until it is
centered under tractor.
®
A. Mower Side Suspension Arms
B. Retainer Spring
C. Rear Lift Link(S)
D. Right Side Rear Mower Bracket
E. Front Lift Link Assembly
E Front Suspension Bracket
H. Front Mower Bracket
I, Left Side Rear Mower Bracket
K. Belt Tension Rod
L. Locking Bracket
M, Engine Clutch Pulley
Q. Deflector Shield
S. Anti-Sway Bar
W. Front Gauge Whee[