Craftsman 917.25024 Operator's Manual page 10

A, Mower Side Suspension Arms
Q.Deflector Shield
5. INSTALL ANTI-SWAY BAR (S)
(IF EQUIPPED)
ANTI-SWAY BAR (S)
_ Towards Towards
Transaxle Mower Deck
90° End IntegratedWasher End
° From right side of mower, first insert
90 ° end of anti-sway bar (S) into hole in
transaxle bracket (T), located near left
rear tire in front of transaxle.
NOTE: Flashlight may be helpful.
Anti-Sway i i i,<-f _................
Bar (S) _,,-,.,," _._.,> J _ ,_
Transaxle Bracket t_
Located Between Rear Tires
NOTE: Dependingon model, bracket (_ may
be differentthan shown but hole for anti-sway
bar will be in same position/location.
Pivot the integrated washer end of anti-
sway bar (S)towards mower deck bracket
on right side of mower. Insert integrated
washer end of bar into hole i nrear mower
bracket (D). Move mower as needed to
insert integrated washer end of bar into
rear mower bracket (D).
Secure with small washer and small
retainer spring as shown.
D. RightSide RearMower Bracket
S. Anti-Sway
Bar
T. TransaxleBracket
6. ATTACH MOWER SIDE SUSPENSION
ARMS (A) TO CHASSIS
• Position front hole inside suspension arm
(A) over pin on outside of tractor chassis
and secure with large washer and large
retainer spring (B).
• Repeat on opposite side of tractor.
t o
A. MowerSide SuspensionArms
B. RetainerSpring
D. RightSide Rear MowerBracket
7. ATTACH REAR LIFT LINKS (C)
• Insert rod end of rear lift link (C) into hole
(U) in tractor lift shaft suspension arm
and pivot link down to mower,
• Lift rearcorner of mower and position slot
in link assembly over pin on rear mower
bracket (D) and secure with large washer
and large retainer spring.
• Repeat on opposite side of tractor.
10