Advertisement
Available languages
Available languages
_
ANGER! N ever a djustspraypattern when
spraying. Neverputhands infrontof nozzle to
adjustspraypattern.
Ontheendof yourspraygunis a nozzlehandle that
youcanslideforward andbackward to adjust t he
spraypattern to beeitherhighor lowpressure.
Slidenozzle backward f or
highpressure mode.
Slidenozzle forward for
lowpressure modeand
detergent application.
Youcanalsoadjust t he sprayso it is concentrated in
a stream pattern or expanded intoa fan pattern by
twisting it.
Twistnozzle counter-
Twistnozzle clockwise f or
clockwise f orfan pattern, narrow spraypattern.
Point t henozzle toward theground, d isengage t he
safetylatch,andpressthetrigger t o testthe
pattern.
• Twisting thenozzle adjusts the spraypattern from
a narrow pattern to a fan pattern.
• Formosteffective cleaning, k eepthespraynozzle
between 8 to 24 inches awayfromcleaning
surface.
• Ifyougetthe spraynozzle tooclose, e specially
usinghighpressure mode, y oumaydamage the
surface beingcleaned.
• Do Notgetcloser t han8 inches whencleaning
tires.
Applying
Detergent
with the Adjustable
Nozzle
IMPORTANT:
Use chemicals designed specifically
for pressure washers, Household detergents could
damage the pump.
IMPORTANT:
You must attach all hoses before you
start the engine. Starting the engine without all the
hoses connected and without the water turned ON will
damage the pump.
To apply detergent, follow these steps:
•
Review the use of the adjustable nozzle.
•
Prepare the detergent solution as required by the
job.
•
Hang the detergent solution container on the hook
of the wireform attached to the handle.
•
Place the filter end of the detergent siphoning tube
into the detergent container.
_
AUTION: When inserting the filter into the
detergent container, route the tube so as to keep
it from inadvertently contacting the hot muffler.
•
Slide the adjustable nozzle forward to low pressure
mode. Detergent cannot be applied with the nozzle
in high pressure position.
•
Make sure the garden hose is connected to the
water inlet. Check that the high pressure hose is
connected to the spray gun and the pump. Start
the engine.
•
Apply detergent to a dry surface, starting from the
bottom and working up.
•
Allow the detergent to "soak in" for 3-5 minutes
before rinsing.
•
For washing, start at lower portion of area to be
washed and work upward, using long, even,
overlapping strokes.
Pressure
Washer
Rinsing
_
ARNING:
Be extremely careful if you use the
pressure washer from a ladder, scaffolding or
any other relatively unstable location. Pressure
in a running washer builds as you climb. When
you press the trigger, the recoil from the initial
spray could force you to fall. The high pressure
spray could also force you to fall if you are too
close to the cleaning surface.
For Rinsing:
•
Slide the nozzle backward to high pressure, press
the trigger and wait for the detergent to clear.
Advertisement
