Epson PowerLite 7000 User Manual page 50

34
2 • Using the Projector
If you need to raise or lower the image on the screen, extend or retract
the foot at the bottom of the projector as follows:
1. Stand behind the projector and support the front of it while you
press the purple button above the lens. This unlocks the foot so it
can move up and down freely. Do not let the projector drop.
Caution: Do not hold the projector by its lens. This can damage
the lens.
2. While pressing the purple Foot Release button, raise or lower the
projector until the screen image is correctly positioned.
3. Release the Foot Release button to lock the foot in its new
position.
4. Level the projector by turning the left-rear foot clockwise to raise
the height or counterclockwise to lower it.