Using The Projector; Turning On Your Equipment - Epson PowerLite 50c User Manual

2
note
If you have more than one
source connected, you may
have to switch to the one you
want to use, as described on
page 25.

Using the Projector

Once you've connected the projector to your computer or other
equipment (as described in Chapter 1), you're ready to turn on the
projector, adjust the image, and give your presentation. This chapter
covers the following:
Turning on the projector and other equipment
Adjusting your image
Using the remote control
Controlling audio and video
Highlighting your presentation
Shutting down the projector and other equipment

Turning On Your Equipment

Make sure your projector and other equipment are set up and
connected correctly, as described in Chapter 1. Then plug in and turn
on your equipment, as described below.
Follow these steps to plug in and turn on your equipment:
1. If you're projecting video,
first plug in and turn on
your VCR, DVD player, or
other video source. (If
you're projecting from a
computer, go to step 2.)
2. To turn on the projector,
first connect one end of the power cord to the projector's power
inlet on its left side.
Using the Projector
23