Craftsman 580.768331 Operator's Manual page 6

KNOW YOUR PRESSURE WASHER
Read the owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Spray Gun
High Pressure Hose
Recoil Starter
Gas Cap
Air
Choke Knob
Throttle Control Lever
Nozzle Extension
with Quick Connect
High Pressure Outlet
Pump
Spray Nozzles
Oil Fill Cap
Detergent Pick-Up
Tube and Filter
Water Inlet
Air Filter - Dry type filter element limits the amount of
dirt and dust that gets in the engine.
Choke Knob - Used to help start a cold engine.
Detergent Pick-Up Tube and Filter - Use to draw
detergent from chemical bottle to the low pressure
water stream.
Gas Cap - Fill engine with regular unleaded gasoline
here.
High Pressure Hose - Connect one end to the spray
gun and other end to the high pressure outlet.
High Pressure Outlet - Connection for high pressure
hose.
Nozzle Extension with Quick Connect - Allows you
to switch between four different spray nozzles.
Oil Fill Cap - Fill engine with oil here. See page 4 for
oil recommendations.
Pump - Develops high pressure water.
Recoil Starter- Used for starting the engine
manually.
Spray Gun - Controls the application of water onto
cleaning surface with trigger device. Includes safety
latch.
Spray Nozzles - Chemical injection, 0°, 15 °, 40°: for
various cleaning applications.
Throttle Control Lever - Sets engine in starting
mode for recoil starter and stops running engine.
Water Inlet - Connection for garden hose.