Advertisement
FULL ONE-YEAR
WARRANTY
ON CRAFTSMAN-
ELECTRIC
EDGER
_:_
c=_
If this Craftsumn Electric Edger fails to perform properly due to a defect in inatefial or workmanship within one year
_<
_x
from the date of purchase, Sears will repair it free of charge.
If this Craftsman Electric Edger is used for commerdal and rental purposes, this warranty covexag_ applie s for only
90 days from the ,date of purchase, This warranty applies only while this product is in use in the United States.
WARRANTY
SERVICE IS AVAILABLE BY CONWACTING
THE NEAREST
SEARS STORE OR SERVICE
_:_
CENTER THROUGHOUT
THE LrNIT!3DSTATES.
<:_
This warranty gives you specific legal fights and you may also have other rights which vary from state to state.
=._ARS, ROEBUCK AND CO., DEPT. 698/731A, Sears Tower, Chicago, IL 60684
IMPORTANT: rules for safe operation
DOUBLE INSULATION
Double Insulation isa conceptinsafety, replacing t hestandard
grounded supplysystem in electric power tcols.Theconstrue-
tion of a double insttlated tool affords comparable pret_etion to a
properly grounded tool without the necessity for usiug a ground-
ed conductor. The double insulation system eliminates the need
fortheusualthree-wire g roundedpower cordand groundsupply
systenLWherever there iselee_c current inthe tool thereare
two complete se_s of insulation
to protect the user. All exposed
metal
parts are isolated
from the internal
metal motor
eom_
ponents
with proteetfng
instthtion:
The lead wires, switch, etc_
with their functional insulation
liave the added prote_ion of non-
conductive sleeving o r housingtocomplete thedoubleinsulation.
system.
SERVICING OF A TOOL WITH-DOUBLE INSULATION lqF__
QUIRES EXTREME
CARE AND. KNOWLEDGE
OF.THE
SYSTEM
AND SHOULD
BE PERFORMED
ONLY BY A
QUALIFIED SERVICE TECHNICIAN. FOR SERVICE WE
SUGGEST YOU RETURN
THE TOOL TO YOUR NEAREST
SEARS STORE FOR REPAIR WHICH WILL BE DONE WITH
ORIGINAL FACTORY REPLACEMENT
PARTS.
SAFETY
RULES FOR POWER TOOLS
CAUTION
!. Keep hands, feet, and facedear ofrotating b lade.
2. Use SafetyGoggles.Wear ata_ timeswhen usingtoo!`
3. Dress properly. Always wear shoes. Do not operatetool
while barefoot or when wearing sandals, c anvas or open-
toed shoes. Use of rubber glovesand safety footwearis
recommended when working outdoors. W ear longpantsto
protect your legs.
4. Keep children away. Keep spectators a t a safedistance.
5. WARNING:
To preventelectric shockhazarduseonlywith
an extension cord suitable
for outdoor use. A two-wire e_rd
withouta ground connection m ay be used since thetoolis
double insulated. Cord should be !8 gauge or heavier to pre-
vent overheating
and loss of power, U.L. listed extension
cords are available at your nearest
Sears store.
6. Toprevent
disconnection of power supply cord from the ez-
tension cord during operation
see hstructions
v_h Fig. 4.
7. _Avoid Dangerous Environment--
Do not use unit in damp or
8. Don't force this too!. It wi!l work begter and safer at the rate
R was designed. Ifmotor slows down too much, pullaway
and allowunitto bbta_n full spee&
9. Do not use tool for any job except that _orwhich itis
intended.
10. Do not immerse tool in water or operate in rai_
1i.
Don't overreach--Keep
proper footing and balance at all
ti_es.
t2.
Don't abuse cord--Never e_rr_ tool by Cord o_ yank cord
from receptacle. Keep cordaway from heat, oii and sharp
edges. Replacedamaged cordimmediately.
13. Nevercarry pluggedintoo!with finger on switch,
14= Disconnect tool from thepower.supply when notinuse and
when making any repairs or inspections.
I5.
Maintain tool with care. Keep air ventsclear of debris. Keep
guards in place arm in working orderand follow instructions
forreplacing b lade.
16. _tore indoorsin a high, dry,lock-up place outofreath of
children.
Page 2
Advertisement
