Craftsman 917.272265 Owner's Manual
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Lawn Mower
  5. 917.272265
  6. Owner's manual
Craftsman 917.272265 Owner's Manual

Craftsman 917.272265 Owner's Manual

Lawn tractor 25.0 hp, 48" mower, electric start, automatic transmission
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual
ICRnFT MnH°I
LAWN TRACTOR
25.0 HP, 48" Mower
Electric Start
Automatic Transmission
Model No.
917.272265
This product
has a low emission
engine
which operates
I
differently
from previously
built engines,
Before you start the
I
engine,
read and understand
this Owner's
Manual.
IMPORTANT:
Read and follow all Safety
Rules and Instructions before
operating this equipment.
For answers
to your questions
about this product,
Call:
1-800-659-5917
Sears Craftsman Help Line
5 am - 5 pm, Mon- Sat
Sears, Roebuck and Co., Hoffman Estates, II 60179 U.S.A
Visit our Craftsman website:www.sears.com/craftsman

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 917.272265 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Craftsman 917.272265

Summary of Contents for Craftsman 917.272265

  • Page 1 Read and follow all Safety about this product, Call: 1-800-659-5917 Rules and Instructions before operating this equipment. Sears Craftsman Help Line 5 am - 5 pm, Mon- Sat Sears, Roebuck and Co., Hoffman Estates, II 60179 U.S.A Visit our Craftsman website:www.sears.com/craftsman...

  • Page 2: Limited Warranty

    LIMITED WARRANTY ON CRAFTSMAN RIDING EQUIPMENT For two (2) years from the date of purchase, if this Craftsman Riding Equipment is maintained, lubricated and tuned up according to the instructions in the owner's manual, Sears will repair or replace free of charge any parts that are found to be...

  • Page 3: Slope Operation

    IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing, objects. Failure to observe the following safety instruct=onscould result in senous injury or death. • Be aware of the mower discharge WARNING: In order to prevent direction and do not point it at anyone. accidental starting when setting up, Do not operate the mower without either transporting, adjusting or making repairs,...
  • Page 4 • Never carry children. They may fall off • Mow up and down slopes, not across. and be seriously injured or interfere • Remove obstacles such as rocks, tree with safe machine operation. limbs, etc. • Never allow children to operate the •...
  • Page 5 Remove obstacles such as rocks, tree • Be sure the area is clear of other limbs, etc. people before mowing. Stop machine if Watch for holes, ruts, or bumps. anyone enters the area. Uneven terrain could overtum the • Never carry passengers or children machine.

  • Page 6: Customer Responsibilities

    =RODUCT SPECIFICATIONS Please read and retain this manual. The instructions will enable you to assemble Gasoline 4 Gallons and maintain your tractor properly. Capacity Unleaded Always observe the "SAFETY RULES". and Type: Regular REPAIR AGREEMENT Oil Type SAE 30 (Above 32°F) A Repair Agreement is available...

  • Page 7: Check Battery

    Keys For Future Use Leveling Mower Wrench Bubble Level Video Cassette Slope Sheet Your new tractor has been assembled at the factory. Review the video cassette before you begin. When right or left hand is mentioned in ADJUST SEAT this manual, it means, from your point of 1.
  • Page 8 CHECK TIRE PRESSURE TO ROLL TRACTOR OFF SKID (See The tires on your tractor were overinflated Operation section for location at the factory for shipping purposes. function of controls) Correct tire pressure is important for best 1. Press lift lever plunger and raise cutting performance.
  • Page 9 CHECKLIST Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this quality product. Please review the following checklist: ,/ All assembly instructions have been completed. ,/No remaining loose parts in carton. / Battery is properly prepared and charged.
  • Page 10 These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. I",1 REVERSE NEUTRAL HIGH CHOKE FAST SLOW tGNtTION ENGINE START PARKING BRAKE PARKING BRAKE PARKING BRAKE ENGINE OFF LIGHTS ON ENGINE LOCKED UNLOCKED BATTERY...

  • Page 11: Freewheel Control

    KNOWYOURTRACTOR READTHIS OWNER'SMANUALAND SAFETY RULESBEFOREOPERATING YOURTRACTOR Comparethe illustrationswith your tractorto familiarizeyourselfwith the locationsof variouscontrolsand adjustments. Savethis manualfor future reference. Attachment Ignition Switch Light Switch Clutch Switch Position Ammeter Lift Choke Lever Plunger Throttle Attachment Control Lift Lever Pedal Reverse Drive Pedal Height Clutch/Brake Adjustment...
  • Page 12 The operation of any tractor result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision safeb / mask worn over spectacles.

  • Page 13: To Operate On Hills

    TO OPERATE MOWER • Press plunger with thumb and move lever to desired position. Your tractor is equipped with an operator The cutting height range is approxi- presence sensing switch. Any attempt by mately 1-1/2 to 4". The heights are the operator to leave the seat with the measured from the ground to the blade engine running and the attachment...

  • Page 14: Before Starting

    ACAUTION: Wipe off any spilled oil or • To re-engage transmission, reverse fuel. Do not store, spill or use gasoline above procedure. near an open flame. Transmission Engaged IMPORTANT: When operating in tem- peratures below 32°F(0°C), use fresh, clean winter grade gasoline to help insure good cold weather starting.

  • Page 15: Cold Weather Starting

    WARM WEATHER STARTING (50 ° F and PURGETRANSMISSION above) CAUTION= Never engage or disengage 7. When engine starts, slowly push freewheel lever while the engine is choke control in until the engine running. begins to run smoothly. If the engine To ensure proper operation and perfor- starts to run roughly, pull the choke...

  • Page 16: Mowing Tips

    MULCHING MOWING TIPS MOWING TIPS • Mower should be properly leveled for IMPORTANT: For best performance, best mowing performance, See "TO keep mower housing free of built-up LEVEL MOWER HOUSING" in the grass and trash. Clean after each use. Service and Adjustments section of •...

  • Page 17: Lubrication Chart

    FILL IN DATES ,svo0 C OMPLETE _ ..REGULAR SERVICE _'_/_(,_"_-_/_j_"SERVICE DATES Check Brake Operation t_ / Check Tire Pressure Check Operator Presence Intedock Systems Check for Loose Fasteners Lubrication Chart Check Battery Level Sharpen/Replace Mower Blades Clean Battery and TerminaLs Check TransaxLs Cooling t# # Check V-Belts...
  • Page 18 TRACTOR IMPORTANT: To ensure proper assembly, center hole in blade must align with star Always observe safety rules when on mandrel assembly. performing any maintenance. Install and tighten blade bolt securely BRAKE OPERATION (45-55 Ft. Lbs. torque). If tractor requires more than six (6) feet IMPORTANT: Special blade bolt is heat...
  • Page 19 NOTE: The original equipment battery your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte not necessary. NOTE: Although multi-viscosityoils TO CLEAN BA'I-rERY AND TERMINALS (5W30, 10W30 etc.) improve starting in Corrosion and dirt on the battery cold weather, these multi-viscosityoils will...

  • Page 20: Engine Oil Filter

    CLEAN AIR INTAKE/COOLING AREAS Use gauge on oil fill cap/dipstick To insure proper cooling, make sure the checking level. For accurate reading, grass screen, cooling fins, and other tighten dipstick cap securely onto the external surfaces of the engine are kept tube before removing dipstick.
  • Page 21 WARNING: TO AVIOD SERIOUS INJURY, BEFORE PERFORMING bSERVICE OR ADJUSTMENTS: Depress brake pedal fully and set parking brake. Place attachment clutch in "DISENGAGED" position. 3. Turn ignition key to "STOP" and remove key. Make sure the blades and all moving parts have completely stopped.
  • Page 22 Bubble Position front plate assembly between Between front mower brackets. Raise deck and Lines plate assembly to align holes Level Decal insert flanged pins. Secure pins with double loop retainer springs between Left Hand the plate assembly and mower Footrest Pedal brackets.

  • Page 23: Mower Drive Belt Removal

    • Before making any necessary adjust- Blade ments, check that both front links are equal in length. • If links are not equal in length, adjust one link to same length as other link. • To lower front of blade, loosen nut "C" "B..
  • Page 24 TO REPLACE MOWER BLADE (SEC- 11.Be sure spring is hooked in secondary ONDARY) DRIVE BELT idler arm and secondary spring arm. Park the tractor on level surface, Engage INSTALL NEW MOWER BLADE parking brake. (SECONDARY) DRIVE BELT 1. Remove mower (See 'q'O REMOVE 12.Install new belt in lower groove of R.H.

  • Page 25: Belt Removal

    TO CHECK AND ADJUST BRAKE TO REPLACE MOTION DRIVE BELT Your tractor is equipped with an adjustable Park the tractor on level surface. Engage brake system which is mounted on the parking brake. For assistance, there is a right side of the transaxle. belt installation guide decal on bottom side of left footrest.
  • Page 26 TRANSMISSION REMOVAL/REPLACE- TO START ENGINE WITH A WEAK BATTERY MENT Should your transmission require removal _.WARNING: Lead-acid batteriesgenerate for service or replacement, it should be explosive gases. _eep sparks,flame and purged after reinstallation and before smoking materials away from batteries. operating the tractor.

  • Page 27: Replacing Battery

    REPLACING BATTERY TO REPLACE HEADLIGHT LAMP _,WARNING: Do not short battery CAUTION: When lit, the halogen terminals by allowing a wrench or any lamps get extremely hot. Hold lamp other object to contact both terminals at assembly by the holder and do not touch the bulb.
  • Page 28 ENGINE IMPORTANT: Never tamper with the engine governor, which is factory set for Maintenance, repair, or replacement of the proper engine speed. Overspeeding emission control devices and systems, which engine above the factory high speed are being done at the customers expense, setting can be dangerous.
  • Page 29 Also, alcohol blended fuels (called Immediately prepare your tractor for storage at the end of the season or if the gasohol or using ethanol or methanol) can attract moisture which leads to tractor will not be used for 30 days or more.

  • Page 30: Troubleshooting

    TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION 1. Out of fuel. 1. Fill fuel tank. Will not start 2. See '3-0 START ENGINE" 2. Engine not "CHOKED" properly. in Operation section. 3.
  • Page 31 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION Loss of power Clean underside of mower Build-up of grass, leaves and trash under mower. (continued) housing. Dirty air filter. Clean/replace air filter. Low oil level/dirty oil.
  • Page 32 TROUBLESHOOTING CHART: appropriate section in manual unless directed to Sears service center =ROBLEM CAUSE CORRECTION Mowerbladeswill 2. Worn/damaged mower Replace mower drive belt, not rotate (con't) drive belt. Frozen idler pulley. Replace idler pulley. Frozen blade mandrel, Contact aSears or other qualified service center, 1.
  • Page 33 TRACTOR - - MODEL NUMBER 917.272265 SCHEMATIC BLACK BATTERY FosmoN CIRCUIT C÷GIB+H _______ C+F,B+E,A÷D G F C IGNITION SWITCH PosmoN CIRCUIT "MAKE" CONNECTIONS CONNECTIONS M+G+AI NONE WIRING INSULATED CLIPS REMOVABLE NON-REMOVABLE RUN/LIGHT B+A1 A2+L NOTE: IF WIRING iNSULATED CLIPS WERE REMOVED B+A1 NONE...
  • Page 34 TRACTOR - - MODEL NUMBER 917.272265 ELECTRICAL...
  • Page 35 TRACTOR -- MODEL NUMBER 917.272265 ELECTRICAL KEY PART DESCRIPTION 163465 Battery 74760412 Boll, Hex 1/4-20 x 3/4 7603J Tray, Battery 145211 Bolt, Btr Front 1/4-20 x 7-1/2 150109 Holddown Battery Front Mount 145769 Nut, Push Nylon Battery Front 114 176138 Switch Interlock 175449 Harness, Light...

  • Page 36: Chassis And Enclosures

    TRACTOR -- MODEL NUMBER 917.272265 CHASSIS AND ENCLOSURES ° •...
  • Page 37 TRACTOR -- MODEL NUMBER 917.272265 CHASSIS AND ENCLOSURES KEY PART NO. NO, DESCRIPTION 174619 Chassis 176554 Drawbar 17060612 Screw, 3/8-16 x 3/4 172542X418 Dash 174996 Panel, Dash, LR 72140608 Bolt 3/8-16 x 1 179174X010 Panel, Dash, RH 17490608 Screw Thdrol 3/8-16 x 1/2 172540X615 Hood Assembly 180679 Plate Battery...

  • Page 38: Ground Drive

    TRACTOR -- MODEL NUMBER 917.272265 GROUND DRIVE _.-39 26 26...
  • Page 39 TRACTOR - - MODEL NUMBER 917.272265 GROUND DRIVE PART PART DESCRIPTION DESCRIPTION 121748X Washer 25/32 x 1-5/8 x 16 Ga..Transaxle (See Breakdown) 174901X418 Console, Shift Hydro gear Model 336-0510 17060512 Screw 5/16-18 x 3/4 124346X Nut Self-Thd Wsh-hd 1/4 Zinc 174367 Clutch Elec 180825...

  • Page 40: Steering Assembly

    TRACTOR - - MODEL NUMBER 917.272265 STEERING ASSEMBLY (,._ ÷ ",----..__ _\ _----i\ _r--7 "Q'--_'2-:'--;:_- "" ¢ 5 "_r/...
  • Page 41 TRACTOR -- MODEL NUMBER 917.272265 STEERING ASSEMBLY PART DESCRIPTION 175139X418 Steedng Wheel 172393 Axle Assembly 169840 Spindle Assembly, L.H. 169839 Spindle Assembly, R.H. 6266H Bearing, Race, Thrust, Hardened 121748X Washer 25/32 x 1-5/8 x 16 Gauge 12000029 Ring, Klip 175121 Draglink STD551137 Washer, Lock...

  • Page 42: Optional Equipment

    TRACTOR -- MODEL NUMBER 917.272265 ENGINE "81 17__16 OPTIONAL EQUIPMENT Spark Arrester PART PART DESCRIPTION DESCRIPTION 175437X505 Control, Throttle 123487X Clamp, Hose 164863 Screw Hwhd H.-Lo #13016 x 3/4 106082X Pad, Spacer 8543R Line, Fuel ..Engine, (See Breakdown) B&S Model Number 446777-0165-E1 148315 Plug Drain Oil Easy...

  • Page 43: Seat Assembly

    TRACTOR - - MODEL NUMBER 917.272265 SEAT ASSEMBLY KEY PART PART NO. NO. DESCRIPTION DESCRIPTION 175134 Seat 72050412 Bolt, Cardage 1/4-20 x 1-1/2 140551 Bracket, Pivot, Seat 121249X Spacer, Split 71110616 Bolt 123740X Spring 19131610 Washer 13/32 x 1 x 10 Gauge 123976)( Locknut, Flange 1/4 Grade 5 145006...
  • Page 44 TRACTOR -- MODEL NUMBER 917.272265 DECALS PART PART DESCRIPTION DESCRIPTION 180978 Decal, Hood/Seat 138047 Decal, Battery Diehard 174969 Reflector L.H. 177913 Decal, Panel Side 177909 Decal, Hood, R.H. 149516 Deca!, Battery Dngr/Psn Eng 177910 Decal, Hood, L.H. 177889 Decal, Grille 133644 Decal, Customer Maintenance 174970...

  • Page 45: Lift Assembly

    TRACTOR - - MODEL NUMBER 917.272265 LIFT ASSEMBLY 13"'"------o, ,, KEY PART PART NO, NO, DESCRIPTION DESCRIPTION 175994 Nut Lift Link 7/16-20 179504 Plunger Assembly 159476 155097 Pointer Height Indicator Shaft Assembly, Lift 178981 123935X Plug Hole Pin, Groove 17060516 Screw 5/16-18 x 1 12000002 E-Ring...

  • Page 46: Mower Deck

    TRACTOR - - MODEL NUMBER 917.272265 MOWER DECK 11 8_...
  • Page 47 TRACTOR - - MODEL NUMBER 917.272265 MOWER DECK PART KEY PART DESCRIPTION DESCRIPTION 180358 Deck Weldroent Mower 48 74780616 Bolt Fin Hex 3/8-16 x 1 138017 Bracket Asm., Sway Bar 72140608 Bolt Rdhd Sqnk 3/8-16 x 1 4939M Retainer Spdng 155986 Bar Pnt Adj.
  • Page 48 ' :o •'_ I11 ,124 6-Sealant (Joint d' etancheite) 57-20W50 Oil - 78,80Z (OZ de 78.820 d' Huile) 127 - Seal and O-ring Kit (Phoque O Sonrm Jeu)
  • Page 49 TRACTOR - - MODEL NUMBER 917.272265 HYDRO GEAR TRANSAXLE - - MODEL NUMBER 336-0510 PAFrr I_-Y PARr DESCRIPTION DESCRIPTION 170351 Main Housing,Assembly 178782 Arm, Brake 170352 Side Housing, Assembly 170415 Slotted Hex Nut 5/16-24 170353 Center Section, Assembly 170416 Cotter Pin 3/32 X 3/4 170354 Swashplate, TrunionMachined 170417...
  • Page 50 TRACTOR -- MODEL NUMBER 917.272265 BRIGGS & STRATTON ENGINE-MODEL NUMBER 446777 TYPE NUMBER 0165-E1 1or 1 1_ I 213_ 2_[_ I _ 188,_ 216 1 267_1 1019 LABEL KIT 1017 I_ _4 Q 12__3 1035 929A _654 1095 VALVE GASKET 276 O 729;...
  • Page 51 TRACTOR -- MODEL NUMBER 917.272265 BRIGGS & STRATTON ENGINE-MODEL NUMBER 446777 TYPE NUMBER 0165-E1 10_9 I022 1100 914_ 24o_, 1169 387_ "_ 628 ep 918 (_ 418 _ 121 CARBURETOR OVERHAUL 108 (_ 131113o _ "l 53,3 276 0 633 e 987 •...
  • Page 52 TRACTOR - - MODEL NUMBER 917.272265 BRIGGS & STRATTON ENGINE-MODEL NUMBER 446777 TYPE NUMBER 0165-E1 °d' 358 ENGINE GASKET K}T 868_ 1022...
  • Page 53 TRACTOR - - MODEL NUMBER 917.272265 BRIGGS & STRATTON ENGINE-MODEL NUMBER 446777 TYPE NUMBER 0165-E1 PART PART DESCRIPTION DESCRIPTION O Jet-Main (Standard) 694001 Cylinder Assembly 690232 Jet-Main (High Altitude) 499585 Kit-Bushing/Seal (Magneto 690989 Kit-Carburetor Overhaul Side) 499811 Carburetor 391086 • Seal-Oil (Magneto Side) 499804...
  • Page 54 TRACTOR - - MODEL NUMBER 917.272265 BRIGGS & STRA'I-FON ENGINE-MODEL NUMBER 446777 TYPE NUMBER 0165-E1 PART PART DESCRIPTION DESCRIPTION 691062 _renheel Puller 865A 691014 Cover-Air Guide 690966 ch-Spark Plug 865B 691015 Cover-Air Guide 690960 Screw (Fuel Pump) 690968 °+ Seal-Valve 808656 Pump-Fuel 691127...
  • Page 55 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION 1. Fold this page along dotted line Indicated above. 2. Hold page before you so that its left edge is vertically parallel to a tree trunk or other upright structure. 3. Sight across the fold in the direction of hill slope you want to measure. 4, Compare the angle of the fold with the slope of the hill.
  • Page 56 Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.

Table of Contents