Advertisement
_k
WARNING:
When servicing, use only identical Craftsman
replacement parts Use of any other part may create a
hazard or cause product damage
Avoid using solvents when cleaning plastic parts
Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil,
grease, etc,
_,
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based
products, penetrating oils, etc.. come
in contact with plastic parts, They contain chemicals
that can damage, weaken or destroy plastic..
DO NOT abuse power tools Abusive practices can
damage tool as well as workpiece,
Only the parts shown on parts tist, page fifteen, are
intended to be repaired or replaced by the customer
All other parts should be replaced by a qualified
service technician at an authorized service facility,
_,
WARNING:
Do not attempt to modify this tool or create
accessories
not recommended for use with this tool,
Any such alteration or modification is misuse and
could result in a hazardous condition leading to
possibte serious personal injury
BATTERIES
Your drill's battery pack is equipped with 13 nickel-
cadmium rechargeable
batteries, Length of service
from each charging will depend on the type of work
you are doing.
The batteries in this tool have been designed to
provide maximum trouble free life, However, like all
batteries, they will eventually wear ouL DO NOT
disassemble battery pack and attempt to replace the
batteries.. Handling of these batteries, especially when
wearing rings and jewelry, courd result in a serious
burn,
To obtain the longest possible battery life, we suggest
the following:
[]
Store and charge your batteries in a cool area°
Temperatures
above normal room temperature
wilt shorten battery life
[]
Never store batteries in a discharged condition.
Recharge them immediately after they are
discharged
[]
All batteries gradually lose their charge The
higher the temperature the quicker they lose their
charge. If you store your tool for long periods of
time without using it, recharge the batteries every
month or two, This practice will prolong battery
life.
OVERLOAD
Your drill has a built-in overload protector to protect
the motor during overloading or prolonged USerThe
overload protector automatically
activates to break the
circuit When this occurs, allow your drill to cool a few
seconds before resuming operation,
Page13
Advertisement
