Operation; Maintenance - Craftsman EZ3 917.388152 Owner's Manual

hot. Allowthe engine to cool for several
minutesbefore fillingthe gas tank. Clean
offany spilledgasolinebefore startingthe
engine.
• Alwaysmake wheel heightadjustments
before startingyour mower. Never
attempt to do this whilethe engine is
running.
• Mow only in daylightor good artificial
light.
OPERATION:
• Keep your eyes and mind on your mower
and the area being cut. Do not let other
interests distract you.
• Do not mow wet or slippery grass. Never
run while operating your mower. Always
be sure of your footing -- keep a firm
hold on the handles and walk.
• Do not put hands or feet near or under
rotating parts. Keep clear of the discharge
opening at all times.
• Always stop the engine whenever you
leave or are not using your mower, or
before crossing driveways, walks, roads,
and any gravel--covered areas.
• Never direct discharge of material toward
bystanders nor allow anyone near the
mower while you are operating it.
• Before cleaning, inspecting, or repairing
your mower, stop the engine and make
absolutely sure the blade and all moving
parts have stopped. Then disconnect the
spark plug wire and keep it away from the
spark plug to prevent accidental starting.
• Do not continue to run your mower if you
hit a foreign object. Follow the procedure
outlined above, then repair any damage
before restarting and operating you
mower.
• Do not
change
the govemor
settings
or
overspeed the engine. Engine damage or
personal injury may result.
• Do not operate your mower if it vibrates
abnormally. Excessive vibration is an
indication of damage; stop the engine,
safely check for the cause of vibration
and repair as required.
• Do not rdn the engine indoors. Exhaust
fumes are dangerous.
• Never cut grass by pulling the mower
towards you. Mow across the face of
slopes, never up and down or you might
lose your footing. Do not mow exces-
sively st eeB _!_.L _l_b_l_yyh en
operating,i_fit_9_ l_!_lY_.l_t_Lff_i9 or
when changingdirections-- maintain
good footing.
• Never operate your mower without
proper guards,plates, grass catcheror
other safety devices in place.
MAINTENANCE AND STORAGE:
• Check the blade and the engine mount-
ing bolts otten to be sure they are
tightened properly.
• Check all bolts, nuts and screws at
frequent intervals for proper tightness to
be sure mower is in safe working
condition.
• Keep all safety devices in place and
working.
• To reduce fire hazard, keep the engine
free of grass, leaves or excessive grease
and oil.
• Check grass catcher often for deteriora-
tion and wear and reptace worn bags.
Use only replacement bags that are
recommended by and comply with
specifications of the manufacturer of your
mower.
• Always keep a sharp blade on your
mower.
• Allow engine to cool before storing in any
enclosure.
• Never store mower with fuel in the tank
inside a building where fumes may reach
an open flame or an ignition source such
as a hot water heater, space heater,
clothes dryer, etc.
CAUTION: Always disconnect sparkplug
wire and placewire where it cannotcontact
spark plugin orderto prevent accidental
startingwhen settingup, transporting,
adjustingor making repairs.
WARNING
The engine exhaustfrom this product
containschemicalsknown to the State of
Califomiato cause cancer, birthdefects, or
other reproductiveharm.
3