Gigabyte GA-X48-DQ6 User Manual page 98

GIGABYTE SATA2 controllers:
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears (RAID/AHCI hard drive(s) will not be detected at this
stage), select Load Driver. (Figure 12).
Step 2:
Specify the location where the driver is saved, such as your floppy disk (Figure 13).
GA-X48-DQ6 Motherboard
Figure 12
Figure 13
- 98 -