Gigabyte GA-MA790GP-UD4H User Manual page 23

Am2+/am2 socket motherboard for amd phenom fxprocessor/amdphenom x4processor/ amd phenom x3 processor/amd athlon x2 processor/ amd athlon processor/amd sempron x2 processor/ amd sempron processor
Table of Contents

Advertisement

Center/Subwoofer Speaker Out Jack (Orange)
Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio configuration.
Rear Speaker Out Jack (Black)
Use this audio jack to connect rear speakers in a 4/5.1/7.1-channel audio configuration.
Side Speaker Out Jack (Gray)
Use this audio jack to connect side speakers in a 7.1-channel audio configuration.
Line In Jack (Blue)
The default line in jack . Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out Jack (Green)
The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can
be used to connect front speakers in a 4/5.1/7.1-channel audio configuration.
Mic In Jack (Pink)
The default Mic in jack. Microphones must be connected to this jack.
In addition to the default speakers settings, the
perform different functions via the audio software. Only microphones still MUST be
connected to the default Mic in jack (
7.1-channel audio configuration in Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio."
• When removing the cable connected to a back panel connector, first remove the cable
from your device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side
to prevent an electrical short inside the cable connector.
~
audio jacks can be reconfigured to
). Refer to the instructions on setting up a 2/4/5.1/
- 23 -
Hardware Installation

Advertisement

Table of Contents
loading

Table of Contents