Integrated Peripherals - Gigabyte GA-MA770T-ES3 User Manual

2-6

Integrated Peripherals

OnChip IDE Channel
OnChip SATA Controller
OnChip SATA Type
x OnChip SATA Port4/5 Type
Onboard LAN Function
Onboard LAN Boot ROM
 SMART LAN
Onboard Audio Function
Onchip USB Controller
USB EHCI Controllers
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
higf : Move Enter: Select
F5: Previous Values
OnChip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
OnChip SATA Controller (AMD SB710 Chipset)
Enables or disables the SATA controller integrated in the AMD SB710 chip. (Default: Enabled)
OnChip SATA Type (AMD SB710, SATA2_0~SATA2_3 connectors)
Configures the operating mode of the integrated SATA2_0~SATA2_3 controller.
Native IDE
RAID
AHCI
OnChip SATA Port4/5 Type (AMD SB710, SATA2_4~SATA2_5 connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the oper-
ating mode of the integrated SATA2_4/SATA2_5 connectors.
IDE
As SATA Type The mode depends on the OnChip SATA Type settings.
Onboard LAN Function
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
Onboard LAN Boot ROM
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip.
(Default: Disabled)
BIOS Setup
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
Enables RAID for the SATA controller.
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
Disables RAID for the SATA controller and configures the SATA controller to PATA
mode. (Default)
[Enabled]
[Enabled]
[Native IDE]
IDE
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enalbed]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
F10: Save
- 44 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults