2-5
Integrated Peripherals
IDE Configuration
OnChip SATA Controller
OnChip SATA Type
Onboard Audio Function
Onboard 1394 Function
Onboard LAN Function
Onboard LAN Boot ROM
SMART LAN
OnChip USB Controller
USB EHCI Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
: Move
Enter: Select
F5: Previous Values
IDE Configuration
OnChip IDE Channel0
: Move
Enter: Select
F5: Previous Values
OnChip IDE Channel0
Enables or disables the integrated IDE controller. (Default: Enabled)
OnChip SATA Controller
Enables or disables the integrated SATA controller. (Default: Enabled)
OnChip SATA Type
Configures the operating mode of the integrated SATA controller.
Native IDE
RAID
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support
Native mode, e.g. Windows XP/2000.
Enables RAID for the SATA controller.
[Press Enter]
[Enabled]
[Native IDE]
[Auto]
[Enabled]
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
F10: Save
IDE Configuration
[Enabled]
F10: Save
- 41 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup