Advanced Bios Features - Gigabyte GA-MA74GMT-S2 User Manual

2-5

Advanced BIOS Features

Virtualization
AMD K8 Cool&Quiet control
 Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
Away Mode
Backup BIOS Image to HDD
Init Display First
x Surround View
Graphics Display Mode j
Internal Graphics Mode
Frame Buffer Size
Current UMA Size
higf : Move Enter: Select
F5: Previous Values
Virtualization
Virtualization allows a platform to run multiple operating systems and applications in independent parti-
tions. With virtualization, one computer system can function as multiple virtual systems.
(Default: Disabled)
AMD K8 Cool&Quiet control
Auto
Disabled
Hard Disk Boot Priority
Specifies the sequence of loading the operating system from the installed hard drives. Use the up or
down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or
<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.
First/Second/Third Boot Device
Specifies the boot order from the available devices. Use the up or down arrow key to select a device
and press <Enter> to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP,
USB-CDROM, USB-HDD, Legacy LAN, Disabled.
Password Check
Specifies whether a password is required every time the system boots, or only when you enter BIOS
Setup. After configuring this item, set the password(s) under the Set Supervisor/User Password item in
the BIOS Main Menu.
Setup
System
Only for GA-MA74GMT-S2H.
j
(Note) This item appears only if you install a CPU that supports this feature.
BIOS Setup
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced BIOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to
reduce heat output from your computer and its power consumption. (Default)
Disables this function.
A password is only required for entering the BIOS Setup program. (Default)
A password is required for booting the system and for entering the BIOS Setup
program.
[Enabled]
[Auto]
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Setup]
[Disabled]
[Disabled]
[Disabled]
[PCI Slot]
Disabled
[D-SUB-DVI]
[Auto]
[Auto]
128MB
F10: Save
- 42 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults