Advertisement
WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER-
VICE OR ADJUSTMENTS:
1. Depress brake pedal fuity and set parking brake.
2, Place attachment clutch in "DISENGAGED" position,
3. Turn ignition key to "STOP" and remove key.
4. Make sure the blades and all moving parts have completely stopped.
5. Disconnect spark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TO REMOVE
MOWER
•
Place attachment
clutch in "DISEN-
GAGED" position.
•
Lower attachment lift lever to its lowest
position,
-
Remove mower bert from electric clutch
pulley (M).
•
Disconnect front link (E) from mower -
remove retainer spring and washer,
•
Go to either side of mower and discon-
nect mower suspension arm (A) from
chassis and rear lift link (C) from rear
mower bracket (D) - remove retainer
springs and washers,
•
Goto other side of mower and disconnect
the suspension arm and rear lift link,
CAUTION: After rear lift links are discon-
nected, the attachmentliftleverwill be spring
loaded. Have a tight grip on lift lever when
changing position of the lever.
•
Slide mower out from under right side of
tractor.
TO INSTALL MOWER
Besure tractor is on levelsurl=aceandengage
parking brake.
•
Lower attachment lift lever to it'slowest
position.
_lk CAUTION: Lift lever is spring toaded.
Have a tight grip on lift lever, tower it slowly
and engage in towest position.
NOTE:
Be sure
mower
side suspension
arms (A) are pointing forward before sliding
mower under tractor.
•
Slide mower undertractor until it iscen-
tered under tractor.
•
ATTACH MOWER SIDE SUSPENSION
ARMS (A) TO CHASSIS - Position hole
in arm over pin (B) on outside of tractor
chassis and secure with washer and
retainer spring.
•
Repeat on opposite side of tractor.
iii +
22
0800Ore×
Advertisement
