How To Use Accessory Tray; How To Use Spraytips; High Pressure - Craftsman 580.988400 Operator's Manual

How to Use Accessory Tray
The unit is equipped with an accessory tray with places to
store your spray gun, nozzle extension and quick connect
spray tips. There are also hooks at the back of the accessory
tray to wrap your high pressure hose.
1. Placeone end of high pressure hose in groove at top of
accessory tray and wrap high pressure hose around
hooks as shown.
How to Use SprayTips
The quick-connect on the nozzle extension allows you to
switch between three different quick connect spray tips.
Spray tips can be changed while pressure washer is running
once spray gun trigger lock is engaged. The spray tips vary
the spray pattern as shown.
LowPressure High Pressure
I/:' V
.
Placenozzle extension in groove on accessory tray as
shown. Pull rubber strap tight around nozzle extension
and place hole in strap over tab on accessory tray.
3. Placespray gun in groove on accessory tray as shown.
Pull rubber strap tight around spray gun and place hole in
strap over tab on accessory tray.
4. insert multi-colored spray tips in holes provided on front
of accessory tray.
Black 25° Green 0° Red
Use to apply 2000 PSi 2500 PSi
detergent 2.3 GPM 2.0 GPM
FoJJow these instructionsto changespraytips:
1. Pull back collar on quick-connect and pull current spray
tip off. Store spray tips in holes provided on the
accessory tray.
e
2.
.
_, WARNING The high pressure stream of water that
this equipment produces could cut through skin
and its underlying tissues, resulting in serious
injury and possible amputation.
• NEVER exchange spraytips withoutthetriggerlock being
engaged on the spraygun.
DONOT twist spraytips whilespraying.
Select desired spray tip:
• For gentle rinse, select green 25° spray tip.
• To scour surface, select red 0° spray tip.
• To apply detergent, select black spray tip.
Pull back on collar, insert newspray tip and releasecollar.
Tug on spray tip to make sure it is securely in place.
Usage Tips
* For most effective cleaning, keep spray tip from 8 to
24 inches (20 to 61 cm) away from cleaning surface.
, If you get spray tip too close, especiallyusing a high
pressure spray tip, you may damagesurface being cleaned.
DO NOT get closer than 6 inches (15 cm) when cleaning
tires.
13