Table of Contents
Advertisement
GENERAL
RECOMMENDATIONS
The warranty on this Tiller does not cover items that
have been subjected to operator abuse or negNgence. To
receive full value from the warranty, operator must
maintain unit as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your unit.
All adjustments in the Service and Adjustments section of
this manuat should be checked at least once each season.
Once a year you should replace the spark plug, clean or
replace air filter, and check tines and belts for wear.
A new spark ptug and clean air filter assure proper air-
fuel mixture and help your engine run better and last
longer.
BEFORE EACH USE
o
Check engine oit level.
e
Checktine operation.
,,
Check for loose fasteners.
Keep unit well lubricated (See "LUBRICATION CHART").
Refer to the engine manual for instructions on engine maintenance.
iMAINTENANOESCHEDULE /_/_//
_
o _.o
Fill in dates as you
/ _ / _'_/ # _/___#J/_._'/,4"
comp,ete
regu,ar
serv,ce.
1_,/_/_#,
_,
_
-,
Check Engine Oil Level
X
Change
Engine
Oil
X
X*
Service
Dates
---7
1
Service air cleaner precleaner
X**
Service air cleaner cartridge
X**
X
Replace spark plug
Clean cooling system
i Check valve clearance
Check for loose fasteners
Lubricate Tiller
x
i Lubricate Tiller Transmission
X
*Change oil every 25 hours when operating the engine under heavy load or in high temperatures.
*Clean more often under dusty conditions or when airborne debris is present. Replace air cleaner parts, if very dirty.
LUBRICATION
CHART
(_)
REFER TO SEPARATE ENGINE OPERATING
& MAINTENANCE
INSTRUCTIONS
(_)
REFER TO CUSTOMER RESPONSIBILITIES
"TILLER LUBRICATION SECTION."
(_
GENERAL PURPOSE GREASE
IMPORTANT:
DO NOT OIL OR GREASE PIVOT POINTS.
VISCOUS LUBRICANTS WILL ATTRACT DUST AND DIRT
THAT CAN CAUSE WEAR ON PIVOT POINTS. IF YOU
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY
POWDERED GRAPHITE TYPE LUBRICANTS.
®
®
TILLER _
>
TINE SHAFT
FIG. 9
ENGINE
(_)
AXLE SHAFT
(_)
Advertisement
Table of Contents
