Epson Stylus Photo R320 Start Here Manual page 3

3
Unwrap the ink cartridges.
4
Open the cartridge cover and remove the paper insert.
5
Lower each cartridge into its holder with the green circuit board facing the front.
The color of the cartridge label should match the marker above the cartridge holder.
Then gently push each ink cartridge down until it is firmly seated.
6
Close the cartridge cover.
7
Maintenance button and close the printer cover.
Press the
CAUTION: Don't turn off the printer or interrupt charging while the light is flashing or
you'll waste ink.
A progress bar is displayed on the LCD panel during ink charging.
8
After ink charging is finished, press OK.
Don't touch the green circuit
board or remove any labels