Zenith P42W34 Installation And Operating Manual page 20

Operation
Me nu 0 pt io ns
- DASP lets you enjoy the best sound wffhout any special adjustment because the TV has time appropnate
sound option based on the program content,
o When adjusting sound options (treble, bass, and balance) manually, DASP automatically changes to !]set.
1. Press the DASP button repeatedly to select the appropriate sound setup as shown below,
l- 7
• You can Nso adjust D_P in the ,_UND menu,
• _, Music, Movie and 5pOrtS are preset for good sound quality at the factory and cannot be
changed.
AVL maintains an equal volume level even if you change channels
1. Press the MENU button and then use A/V button to select time 5OUND menu,
2 Press the I1_ button and then use &/V button to setect A11,'_,
3. Press the i_ button and then use A IV button to set_ On or _.
4. Press the ENTER button to save,
You can adjust sound treble, bass _d balance to the levels you prefer.
1, Press the MENU button and then use ,&/V button to set_ the $OUN:ID menu.
2. Press the I_ button and then use A .t V button to select the desired sound option
(_, "l_eble Bass).
3. Press time I1_ button and then use _11fll,, button to make appropriate adjustments
4 Press the ENTER button to save
The TV can receive MTS stereo prog_ms and any SAP (S_ondary Audio Program) that accompanies time
stereo program _ the system to be transmitted one additional sound signaf as well as the origina_ one.
Mono : The p_imasy language is heard from left and right s_kers. Signal mode is mono.
Stereo : The primary language is heard from left and right speakers Signal mode is stereo
SAP : The secon_ry I_guage is heard from left _d right speakers
1. Press the MTS button repeatedly
• Select mono sound mode if the signaE is not dear or in poor signat reception areas.
• Stereo, SAP mode are avaiJaMe only if included on the broadcast signal,
20 Plasma TV