Advertisement
GET:TO
KNOW
YOUR REMOTE
(MBR3457)
AUTO
FIND
OPTION
(ALTERNATE
PROGRAMMING
METHOD)
If'you've
tried all the codes for your product
and none operates it, you can use Auto Find to search for the code you need. Follow
the steps below for each product
you want to program.
Please be patient while using this method;
the remote may have to search all
c f the codes shown in the chart on the next page.
To Auto Find a Code
1. Turn On the product you want to operate.
2. Press and hold PRG using a blunt object. Release PRG after the
indicator light turns on.
3.
Press the key to be programmed:
CATV, VCR, AUX, or TV.
4.
Enter"0-0-0,"
then press ENTER within two seconds. Auto
Find is active when the indicator light flashes and remains lit.
5.
Point the remote at the product.
6.
Press and release POWER repeatedly, about once a second,
until your product turns Off. The indicator light turns Off when
you press POWER and On when you release it.
7.
Press ENTER immediately to save the code. The indicator light
flashes :o indicate the code has been saved.
8.
Press POWER
to turn On your product.
9. Test your product. If the remote fails to operate the functions
you use most often, use Auto Find again to search for a better
code. (Auto Find resumes its search after the last code that was en-
tered and saved in step 7.)
Notes:
121 If the indicator light stay,'; on as you press POWER, Auto
Find has tried all of the codes. If the product you want to
control has not turned off, your remote carmot work with
it, in which case you must ttse the product's own remote
control.
[] To cancel .Auto Find, press PRG at any time during Auto
Find.
Equipment
to be
_:_ntrolled
"lypical
Remote
Control
2212-0
4 -- 3
Advertisement
