Advertisement
GET TO KNOW
YOUR REMOTE
(MBR3457)
m
i
PROGRAMMING
YOUR
REMOTE
If you're using Zenith products, the remote is already programmed for the most common codes: TV --: 101, VCR = 201, CABLE =
353, and AUX = 401. For other brands, or if your remote fails to control your Zenith products, you'll have to program the remote.
Step-By-Step Instructions
Response On Remote
1.
Install the batteries if you have not already done so.
2.
Press and hold O
using a blunt object.
Indicator light stays on to shcw you're in the programming
Release PRG after the indicator light turns on.
mode.
3.
Press then release the
Indicator light flashes to show remote is ready to accept
button for the product
(_@
@@
a code.
being programmed.
4.
Indicator light flashes for each digit you enter.
5o
°
Enter3-digit
(_)
(_)
(_)
product
code
@
@
@
from the chart
@
(_
@
which follows.
(_)
@
Press then release @
to save the code.
Point remote at product
and press
(_
to test the
product's
operation.
If it does not turn on, reprogram
the
remote
using a different
code listed for your product.
Indicator light on remote flashes and turns off to show your
code was accepted.
Product turns On.
If none of the codes listed for your product operates
it,
use Auto Find as described
below.
7.
Repeat the above steps to program the remote for another product.
Advertisement
