Table of Contents
Advertisement
FEATURES
• Flat Picture Tube - It reduces the influence of surrounding light resulting in outstanding
image detail and clarity.
• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that are available in
your area. When operating on a cable system, it can tune to the standard VHF channel frequencies
plus up to 113 cable channel
frequencies.
The actual number of channels received depends upon channel reception in your area or your cable system.
• On-Screen
3 Language
Display - Consists of channel, sleep timer, volume level, muting, text/caption indicators and picture
control adjustments. These can be displayed
in English, Spanish or French.
• ON/OFF Timer - Allows you to automatically turn on or off your TV at a set time.
• Sleep Timer - Operable from the remote control, this TV can be programmed
up to 120 minutes to turn off automatically.
• V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded with this
information.
The V-Chip will allow you to set a restriction level.
• Picture Control
Adjustments
- The On-Screen display allows precise remote control adjustment of BRIGHTNESS,
COLOR,
CONTRAST,
SHARPNESS,
TINT and COMPONENT.
• Closed Captioned
Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired viewers.
• Stereo/SAP
Reception
- This TV is designed to receive stereo and separate audio program (SAP) broadcasts where available.
• BBE- BBE gives you the vivid sound with so much presence.
• Video Input Jacks - This unit is equipped 3 types of video input jacks. The component
video in jacks and S-video in jack enable
you to watch the DVD player or the video devices with high quality picture.
• Remote
Control
- You can operate your VCR, Cable Box, Satellite Dish and DVD after you have registered the 3-digit codes for
their brand name.
LOCATION OF CONTROLS
FRONT
BACK
23
6
7
1. POWER Button - Press to turn the TV on or off.
2. Remote Sensor - Signals from the Remote Control unit
are received here.
3, ON TIMER Indicator - This indicator lights up when the
powered up. It also lights up when ON TIMER program
is turned ON while power is OFF.
4. CHANNEL +/- Buttons - Press to select a higher or
lower numbered channel set into memory.
5. VOLUME +/- Buttons - Press to raise or lower the
volume of the sound.
6, VIDEO 3 IN Jacks (Front) - Audio and video signal
cables from an external source can be connected here.
7. HEADPHONES JACK- Plug an earphone or headphones
with an 1/8 miniplug into this jack for listening.
8. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF antenna
or CATV cable to this jack.
4
8
9 10 11
12
9. VIDEO 1 IN Jacks (Rear) - Audio and video signal
cables from an external source (ex. VCR) can be
connected here. If your video device has S-video out
jack, connect to S-video in jack.
10, VIDEO 2 IN Jacks - Audio and video signal cables from
an external source (ex. DVD) can be connected here.
If you have a DVD with component video out jacks,
connect to the component video in jacks. If you have a
video device without the component video out, connect
to video in jack.
11, REAR AUDIO (L / R)/VIDEO OUT Jacks - Used to
output audio and video signals to a TV, amplifier or VCR.
NOTE: This video out jack does not output the signal
from component video in jacks.
12. AC Power Cord - Connect to a 120V, 60Hz outlet.
Advertisement
Table of Contents
