JVC DLA-HD350 Instructions Manual page 33

Input Signal > HDMI
HDMI
11
Configures HDMI input signal.
Input
Color Space
Control with HDMI
●
The setting is available only if the HDMI terminal is selected.
●
Abbreviation
CEC: Consumer Electronics Control
Input Signal > COMP.
COMP.
12
Configures the input signal for the component video input terminals.
Color Space
●
The setting is available only if the component video terminals are selected.
Input Signal > Video/S-Video
Video/S-Video
13
Configures the Video/S-Video input signals.
NTSC Setup Level
●
Adjust this only when NTSC signals are input via Video or S-Video terminal.
Color System
●
The setting is available only when the Video or S-Video input image is projected.
Auto Automatically configures the input signals.
Select this when the dynamic range of the input images is
Standard
16-235.
Select this when the dynamic range of the input images is
Enhanced
0-255.
Auto Automatically configures the input signals.
Select this when the Y Cb Cr(4:4:4) video signals are
YCbCr(4:4:4)
input.
Select this when the Y Cb Cr(4:2:2) video signals are
YCbCr(4:2:2)
input.
RGB Select this when the RGB video signals are input.
On Enables CEC communications.
Off Disables CEC communications.
Y Pb/Cb Pr/Cr Select this when the component video signals are input.
RGB Select this when the RGB video signals are input.
Select this when RGB video signals and sync signals are
SCART
input via the SCART interface for European markets.
0IRE Adjusts the gradation for signals without the 7.5 IRE setup.
7.5IRE Adjusts the gradation for signals with the 7.5 IRE setup.
Auto Configures the color system automatically.
NTSC Select this when the color system is NTSC.
NTSC4.43 Select this when the color system is NTSC4.43.
PAL Select this when the color system is PAL.
PAL-M Select this when the color system is PAL-M.
PAL-N Select this when the color system is PAL-N.
SECAM Select this when the color system is SECAM.
ENGLISH