JVC LT-37X688 User Manual page 66

You can program your remote control tooperate your external devices, using t he instructions
and codes onpages 67-71.The following external devices can beoperated using y our
remote control.
Device ' Mode ' Applied for these functions
CaMe Set Top Box
Cab]e/PVR Combination
Sate]rite Set Top Box
DBS/PVR Combination
STB
Power on/off, Channel up/down, Volume up/down, Number 0 - 9, Tune, Return+/TV,
Muting, Favorite Channel, Menu on/off, Arrow buttons, OK/Enter, Back, DVR (JVC Only)*,
Guide (EPG), Sub Channel, Closed Caption, Display (Recall),
Rewind (_), Playback (_-), Forward (_), Record (®), Stop ([]), Pause ([]).
Page
67
VCR, DBS/PVR Combination VCR Power on/off, Channel up/down, Menu on/off, Arrow buttons, OK/Enter, Sack, Guide (EPG), 68, 69
PVR, DVD/PVR Combination TVNCR, Closed Caption, Eject (A), Rewind (_), Playback (_-), Forward (_), Record (e),
Stop (_), Pause (1!1!).
DVD Player, DVD Recorder
Home Theater in Box
DVD Power on/off, Channel up/down, Menu on/off, Arrow buttons, OK/Enter, Sack, Guide (EPG), 70
TV/DVD (TVNCR button), Sub Title (Sub T.), Open/Close (._), Rewind (_), Playback (1_),
Forward (_), Record (o), Stop ([]), Still ([]).
Amplifier, Home Theater in Box AUDIO Power on/off, Audio Input Selection (V1 button), Volume up/down, Muting,
Receiver DVD operation buttons: Menu on/off, Arrow buttons, OK/Enter, Back, Sub Title (Sub T.),
Open/Close (&), Rewind (_), Playback (_), Forward (_), Stop ([]), Still (n).
* DVR button only applies to JVC DVR (Dish Satellite STB}.
Notes:
• To record to your VCR or DVD, hold the record ( • ) button on the remote control and press play
(_-).
• If the code you programmed doesn't work, try the next one. If no codes work, refer to "Search
Code Function" on page 66. If your remote does not work after using the "Search Code Function",
use the remote that came with your device. Your TV remote can not be guaranteed to work with all
models, brands or operations.
• When the television remote control does not operate, for a model that allows you to switch the
remote control code on the device side, you can try switching the setting to default or something
else on the device side.
1) Find your device and device's brand from the code list. See page 67 - 71.
2) Select the mode of your device by pressing the MODE button. Then confirm the mode LED on the
remote control.
3) Press and hold the TUNE button, then enter the first four digit code number listed using the
number buttons. When the code is set, the mode LED goes out for a second, then it lights.
4) After confirming the proper mode LED, release the TUNE button, and confirm the operation of your
device.
5) If your device does not respond, try and enter the next code.
1) Select a mode of your device by pressing the MODE button.
2) Press the POWER and RETURN+iTV buttons. Hold for at least 3 seconds and release. Then confirm
the mode LED blinks.
3) Press any button* on the remote, and see if the selected device responds. *Use the applied
buttons except for _1 I_ cursors, Return+/TV and Rec ( • ) on the above chart.
4) If there was a response, press RETURN+/TV. The codes are now set. Then confirm the mode
LED goes out.
5) If there was no response, try to select the previous code or the next code by using _1 or I_ . If you
repeat a total of 65 times for the STB (90 times for the VCR, 120 times for the DVD and 132 times
for the AUDIO) without a response, use the remote control that came with your equipment. Press
RETURN+/TV to exit. Then confirm the mode LED goes out.