Power; Number Buttons; Tune; Input - JVC LT-37X688 User Manual

Illillillill
Turns the TV on or off.
(_ Press the POWERbutton
Il ltri111'_'iI-]11lt;fi_ •. i [i] ,'€_4',j _1
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
(_ 1
(ONE)
(_ 2 (Two)
i[lrli_
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the TUNE button. For example, to move to channel 12:
1
(ONE)
(_ 2 (Two)
(_ Press the TUNE button
Selects the signal input source for the television: VIDEO-l, 2, 3, 4 or 5 for video devices like
VCRs, DVD players, or camcorders.
Press the V4 V5 button
V1, V2, V3,
or
Notes:
• When you return to TV mode, press the RETURN+/TV button or direct 10 key pad or CHANNEL
+/- button.
• You can also access by pressing the INPUT button on the side of the TV instead of the remote.
Use these buttons to move up or down all the available channels your TV is able to receive.
To move rapidly through the channels using JVC's Hyperscan feature, press and hold CH+ or
CH-.
Use these buttons to raise or lower the TV's volume level. The maximum is the level you set in
Volume Limit. See page 51.