Integrated Peripherals - Gigabyte GA-G41MT-D3PT User Manual

2-7

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
On-Chip Primary
On-Chip SATA Mode
x PATA IDE Set to
SATA Port0/2 Set to
SATA Port1/3 Set to
Azalia Codec
Onboard H/W LAN
 SMART LAN
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
USB 1.0 Controller
USB 2.0 Controller
USB Keyboard Function
USB Mouse Function
USB Storage Function
: Move Enter: Select
F5: Previous Values
On-Chip Primary PCI IDE
Enables or disables the first integrated IDE controller. (Default: Enabled)
On-Chip SATA Mode
Configures the integrated SATA controller.
Disabled Disables the integrated SATA controller.
Auto Lets the BIOS set SATA devices to Combined or Enhanced mode. If your onboard
SATA controller is automatically configured to Combined mode, you can manually
re-configure it to Enhanced mode as needed. (Default)
Sets all SATA devices to operate in PATA mode. Combined allows a maximum
Combined
of 4 ATA devices to be used simultaneously: two PATA devices plus two SATA
devices.
Enhanced Sets all SATA devices to operate in SATA mode.
Non-Combined Sets all SATA devices to operate in PATA mode and disables the integrated IDE
controller.
PATA IDE Set to
This item is configurable only when the On-Chip SATA Mode is set to Combined.
Ch.0 Master/Slave Sets the IDE channels to Ch. 0 Master/Slave. (Default)
Ch.1 Master/Slave Sets the IDE channels to Ch. 1 Master/Slave.
Disables the integrated IDE controller when Non-Combined is selected.
Disabled
SATA Port 0/2 Set to
This value is dependent on the On-Chip SATA Mode and PATA IDE Set to settings. When PATA IDE Set
to is configured to Ch. 1 Master/Slave, this option will be automatically set to Ch. 0 Master/Slave.
SATA Port 1/3 Set to
This value is dependent on the On-Chip SATA Mode and PATA IDE Set to settings. When PATA IDE Set
to is configured to Ch. 0 Master/Slave, this option will be automatically set to Ch. 1 Master/Slave.
Azalia Codec
Enables or disables the onboard audio function. If you wish to install a 3rd party add-in audio card instead
of using the onboard audio, set this item to Disabled. (Default: Auto)
Integrated Peripherals
PCI IDE [Enabled]
[Auto]
Ch.0 Master/Slave
Ch.2 Master/Slave
Ch.3 Master/Slave
[Auto]
[Enabled]
[Press Enter]
[Disabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 31 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup