Table 31. Removal steps of LCD bezel assembly (continued)
When installing: Make sure that all the latches are attached firmly. Then secure the bezel with the screws.
1200 Integrated camera
For access, remove these FRUs in order:
•
"1020 Hard disk drive or solid state drive assembly" on page 54
•
"1030 Keyboard" on page 55
•
"1040 Top case assembly" on page 58
•
"1090 Battery pack" on page 62
•
"1180 LCD unit" on page 73
•
"1190 LCD bezel assembly" on page 76
Table 32. Removal steps of integrated camera
When installing: Make sure that the connector is attached firmly.
.
Chapter 8
Removing and replacing a FRU
77