Quick Start; Quick Power On; Vqt3E42 - Panasonic SDR-S71PC Owner's Manual

This u nit will r esume recording pause mode
about 0.8 seconds after the LCD monitor is
reopened.
{_Change the mode t o _
1 Select the menu. (-) 27)
[SETUP] _ [QUICK START] _ [ON]
2 Close the LCD monitor while
the mode is set to _ .
]
When the power is turned on with the mode
set to _ , the unit will enter the recording
pause mode after about 1.9 seconds.
Select the menu. (-) 27)
[SETUP] _ [QUICK POWER ON]
[ON]
• In the Quick power on mode, the zoom
magnification becomes 1 ×.
The status indicator O flashes green and the
unit goes into Quick start standby mode.
3
Open the LCD monitor.
6
The status indicator O lights red and the unit
is put into recording pause.
• When in Quick start standby mode
about 70% of the power used in
Recording pause mode is being
consumed, so the recording time will
be reduced.
• Quick start standby mode is canceled if
about 5 minutes have elapsed
mode is set to []
• It may take some time for Automatic white
balance to adjust.
• In the Quick start mode, the zoom
magnification becomes 1 ×.
• If [ECONOMY] (-_ 29) is set to
[5 MINUTES] and the unit automatically
goes into Quick start standby mode, close
the LCD monitor and then open it again.
• Turn the unit off using the power button.
4O
VQT3E42