Panasonic Digital Palmcoder PalmSight PV-DV200 Operating Instructions Manual page 74

PV-DV200
A
1
Turn the Eyepiece
counterclockwise 1/8 of a turn.
2
Pull the Eyepiece free.
Remove any lint or dust particles
with a soft clean cloth being careful
not to scratch the glass surfaces.
B
3
To re-install the Eyepiece
Line up the marks on the Eyepiece
with the grooves inside the EVF
shaft and attach. Turn it
clockwise 1/8 of a turn to lock in
place.
PV-DV400
1 Slide the Viewfinder backward to its fully
expanded position and then tilt it
upward.
2 Remove the EVF Eyepiece 2 screws
with a screwdriver (+).
3Turn the Eyepiece counterclockwise 1/8
of a turn.
4
Pull the Eyepiece free.
Remove any lint or dust particles with a
soft clean cloth being careful not to
scratch the glass surfaces.
5 To re-install the Eyepiece
Line up the marks on the Eyepiece with
the grooves inside the EVF shaft and
attach, Turn it clockwise 1/8 of a turn to
lock in place.
6 Replace the EVF Eyepiece screws and
tighten with a screwdriver.
• If you lose EVF Eyepiece screw, order
Part No.XQN2+BV4FXK for
replacement.
74