Table of Contents
Advertisement
Build a security application
The Administrator can combine options on the application page to perform many useful
security applications. There are two
trigger
sources
coming
from
attached devices such as for motion
detection. There are also two kinds
of actions responding to such events,
including uploading snapshots over
the
Internet
and
driving
other
attached devices. To upload the
snapshots, users can choose either
email or FTP according to user's
needs. Both e-mail and FTP use the
network settings on the network
page. Refer to the definition section
for detail configuration.
1.
Click
on
"Configuration"
on
homepage,
2. Click on "Application" at the left
column,
3. Check the weekdays as you need
and give the period of "Snapshots
begin" time and "Snapshots end"
time
to
monitor
the
trigger
conditions every day,
4. Check the "Event operation".
The trigger condition can be set to
detected motion or status of the
attached device,
- 33 -
www.vivotek.com
Advertisement
Table of Contents
